Main performance and features
1. Highest efficiency: The three-axis rapid traverse speed has been increased by 50%, and the tool change time of the direct-coupled spindle has been significantly improved, providing users with the highest processing performance.
2. High rigidity: The main parts are made of cast iron, which ensures that the cutting force and the gravity of the machine tool can be well absorbed by the machine tool to ensure high processing accuracy.
3. High-performance spindle: using high-performance precision spindle bearings, high-speed up to 12000rpm, with the spindle oil cooling system, effectively controlling the high-speed temperature rise of the spindle
4. Tool magazine: 24 manipulator magazines, the manipulator can be exchanged quickly and reliably, the performance is stable, the tool change time is improved, and the processing is accurate and high-quality.
5. Linear shaft drive structure: a drive structure with one end fixed and one end supported, combined with the pre-stretching structure of the lead screw, ensures the most accurate drive system. 6. Spindle drive structure: The spindle and the Motor & Generator are directly connected through a high-speed coupling to reduce the loss of mechanical efficiency during the transmission process.
7. Three-axis linear guide rail: smooth operation, optional roller guide rail.
8. Large-diameter C3-level lead screw: with pre-stretching structure, the first part is thermally elongated, and the lead screw bearing adopts contact-type sealed bearing, which runs reliably.
9. Chip removal system: economical and practical spiral chip removal, stable and reliable chain chip removal, providing the most efficient solution for various chip types.
10. Cooling system: a large-capacity water tank and a large-flow spindle head spray system can effectively reduce the temperature rise of the spindle and the workpiece during cutting, and can also be equipped with a large-flow chip flushing system to effectively remove chips.
11. Centralized lubricating oil system: high-efficiency centralized lubricating system, reasonable oiling interval, ensure good lubrication of moving parts and prolong service life 12. Simple oil-water separator: according to the density difference between water and oil, use gravity The sedimentation principle removes the oil in the cutting fluid and ensures the circulating use of the cutting fluid.
12. Optional automatic door, running accurately and accurately, provides conditions for users to realize automatic production line.
| Model No. |
WVM600 |
WVM850 |
| Work table size |
800x420mm |
1000x500mm |
| Max.loading weight |
500Kg |
500Kg |
| T slot size |
3x18x25mm |
5x18x100mm |
| X/Y/Z-axis travel |
620x440x540mm |
860x510x560mm |
| Moving speed XYZ axis |
36/36/30m/min |
36/36/30m/min |
| Max.cutting speed XYZ axis |
10m/min |
10m/min |
Distance from Spindle center
to Column face |
550m/min |
607m/min |
Distance from spindle end face
to worktable |
140-680mm |
145-705mm |
| Spindle speed |
12000rpm |
12000rpm |
| Shank form |
BT40 |
BT40 |
| Libery capacity |
24Pcs(Manipulator),
16Pcs(Bamboo Hat ATC) |
24Pcs(Manipulator)
16Pcs(Bamboo Hat ATC) |
| Tool change time |
2.7s(Manipulator)
5-8s(Bamboo Hat ATC ) |
2.7s(Manipulator)
5-8s(Bamboo Hat ATC) |
| Max.tool weight |
8Kg |
8Kg |
1999-
Jilin Winma Machinery Co., Ltd. All Rights Reserved.
